![]() |
This section explains and illustrates how to use or modify
various kinds of features. The table below lists the information you will find. |
![]() |
Using Aerospace Sheetmetal Design assumes that you are in a CATPart document. |
![]() |
Edit the parameters: select the Parameters tab and define the element thickness and bend radius values. |
![]() |
Compute the bend allowance: select the Bend Allowance tab and define the allowance value (K factor). |
![]() |
Define the compensations and runout: select the Joggles tab and define the compensations and the runout for the joggle. |
Please refer to the Customizing chapter to define the Sheet Standards Files. |