Generating the HTML Report
during Synchronization

This file explains the contents of the Html Report created during the Synchronization.
 

The HTML report is composed of accurate fields, which describe the changes that occurred during the synchronization.

Only the tables which have modified components are shown, except for the Synchronization Parameters table, which is always present.
They rely on the fields that can be found in the Synchronize dialog box.

  • Synchronization Parameters:

    • Option:
      • Simulation
      • Automatic flattening on added components
      • Reset the synchronization attributes.
    • Action:
      • Remove the components
      • Add the components
      • Replace the reference of components
      • Synchronize the bundle segment structure
      • Synchronize the attributes
      • Synchronize the knowledge parameters.
    • Components:
      • Bundle segments
      • Devices
      • Supports
      • Protective coverings
      • Wires.
  • List of Removed Components:
    • Bundle Name
    • Bundle Segments
    • Devices
    • Supports
    • Protective coverings
    • Wires.
  • List of Added Components:
    • Bundle Name
    • Bundle Segments
    • Devices
    • Supports
    • Protective coverings
    • Wires.
  • List of Replaced Components:
    • Bundle Name
    • Devices
    • Supports.
  • List of Bundle Segment Structure Modifications:
    • Bundle Name
    • Modification Number
    • Before
    • After.
  • List of Bundle Segment Attribute Modifications:
    • Bundle Name
    • Name
    • Reference Designator
    • Length
    • Diameter
    • Bend Radius
    • Separation Code
    • Color.
  • List of Device Attribute Modifications:
    • Bundle Name
    • Instance Name
    • Reference Designator
    • Sub Type
    • Part Number
    • If Moved
    • Orientation from back shell.
  • List of Support Attribute Modifications:
    • Bundle Name
    • Instance Name
    • Part Number
    • Support Position.
  • List of Protective Covering Attribute Modifications:
    • Bundle Name
    • Instance Name
    • Reference Designator
    • Layer Number
    • Taping Angle
    • Overlapping
    • Inner Diameter
    • Width
    • Thickness
    • Bend Radius
    • Linear Mass
    • Line Type
    • Length.
  • List of Wire Attribute Modifications:
    • Bundle Name
    • Instance Name
    • Reference Designator
    • Sub Type
    • Diameter
    • Linear Mass
    • Bend Radius
    • Separation Code
    • Color
    • Modified Route.
  • List of Elements Showing an Error:
    • Bundle Name
    • Instance Name
    • Error Message.
In the Synchronization Parameters table, the options that have been selected in the Synchronize dialog box are set to YES, the others are set to NO:

Synchronization Parameters
Options Actions Components
Simulation NO Remove components YES Bundle segments YES
Automatic flattening
on added components		 YES Add components YES Devices YES
Reset the synchronization
attributes		 NO Replace component reference YES Supports NO
    Synchronize bundle segment
structure		 NO Protective coverings NO
    Synchronize attributes YES Wires YES
    Synchronize knowledge parameters YES    

In all the fields of the attribute and structure modification list, two lines appear:

  • The first line indicates the status of the component before synchronization.
  • The second line indicates the parameters that have been changed with the synchronization.

List of Wire Attribute Modifications
Bundle Name Instance Name Reference
Designator		 Sub
Type		 Diameter Linear
Mass		 Bend
Radius		 Separation
Code		 Color Modified
Route
Electrical Bundle2.1 Wire-plus1 Wire-plus1   2mm 0kg_m 20mm Attribute unset yellow  
        5mm         NO

The added, replaced, removed component fields have one line per element indicating the modifications.

List of Added Components
Bundle Name Bundle Segments Devices Supports Diameter Protective Coverings Wires
Electrical Bundle2.1           Wire-minus1
          Wire-minus2
          Wire-minus3

Find hereafter the list of the errors that can occur during the synchronization and that will be reported in the Html file:

  • "The 3D harness flattening and 3D harness design link is broken"
  • "Error during the Analyze"
  • "Error during the Remove Component Synchronization"
  • "Error during the Bundle Segment Structure Synchronization"
  • "Error during the Add Component Synchronization"
  • "Error during the Attribute Access"
  • "Error during the Replace Component Synchronization"
  • "Error during the Bundle Segment Attribute Synchronization - Different Bundle Segment Structure"
  • "Error during Attribute Synchronization - Internal link failed to 3D harness flattening from 3D harness design"
  • "Error during the Bundle Segment Attribute Synchronization - Different Number of Supports"
  • "Error during the Bundle Segment Attribute Synchronization - Different Supports Configuration"
  • "Error during the Add Component - The original component document is not saved"
  • "Error during the Wire Route Synchronization"
  • "Error during the Protective Covering Synchronization - Underlying Curves are not connected"
  • "Error during the Protective Covering Synchronization - Underlying Curves are not tangential"
  • "Error during the Device Move"
  • "Error during Bundle Segment Move"

List of Elements Showing an Error
Bundle Name Instance Name Error Message
Geometrical Bundle2.1 Connector_F.1 Error during Add Component Synchronization
Connector_F.2 Error during Add Component Synchronization
Note: The Html report is generated with a default Cascading Style Sheet document (.css) that can be personalized.