The default offset value is applied to all faces on the selected body.
The default value is 0mm. It will take positive and negative value.
You can also define the unique offset value to the selected faces with
Other
offset faces.
Enter 6mm for Offset in Other
offset faces.
-
Select red and green faces for Faces as below.
When you wish to apply the same offset value to other selected
faces, check Apply distance to all selected faces.
-
Check Apply distance to all selected
faces.
-
 |
|
Core (Specific to Shellable Feature) |
The Core capability enables you to define a core body
(offset) for a shellable feature.
-
Select Core tab.
Select Select core for Type.
Select Body.2 for Core body.
Enter 1mm for Default offset.
Enter 2mm for Offset in Other
offset faces.
Select a green face for Faces.
Click OK.