Indexes

ABQJob (Object)

Represents an Abaqus job (ABQJob) object.
Role: Access an Abaqus job object or determine its properties.

ComputationDir: Sets or returns the computation directory.
ContactPrint: Returns or sets whether contact constraint data are printed.
Description: Returns or sets the job description.
EchoPrint: Sets or returns whether an echo of the input data is printed.
HistoryPrint: Sets or returns whether history data are printed.
InputFileFormat: Sets or returns the format of the input file generated by the job.
MaxMemory: Sets or returns the amount of memory (in percent or MB) available to the solver
MemoryUnit: Sets or returns the units to be used for specifying the maximum memory to be used by the solver.
ModelConsistencyCheck: Sets or returns whether a model consistency check should be performed.
ModelPrint: Sets or returns or sets whether model definition data is printed.
NumCpus: Sets or returns the number of CPUs to use for this analysis.
ParallelizationMethodStandard: Sets or returns the parallelization method for the Abaqus/Standard direct solver.
RestartReadInterval: Sets or returns the interval of restart read requests.
RestartReadJob: Sets or returns or the path to the original job (*.
RestartReadOption: Sets or returns the restart read option.
RestartReadStepNumber: Sets or returns the step number of restart read requests.
RestartReadStepSelectionOption: Sets or returns the step selection option for restart read.
RestartReadStep: Sets or returns the Step.
RestartRequestFrequencyValue: Sets or returns the frequencey value of restart requests.
RestartRequestFrequency: DEPRECATED - please use RestartRequestOption instead.
RestartRequestIntervalValue: Sets or returns the interval of restart requests.
RestartRequestOption: Sets or returns the restart request option.
RestartRequestOverlay: Sets or returns the overlay option for the restart request.
RestartRequestTimeMarks: Sets or returns the time marks flag for restart requests.
Scratch: Sets or returns or the path to the scratch directory.
Source: Sets or returns the source for analysis.
Type: Returns or sets the job type.
UserSubroutine: Sets or returns the user subroutine file path.

SubmitJob: Submits the job.
WriteInputFile: Writes the input file for the job.

Properties

o Property ComputationDir(

) As

Sets or returns the computation directory.

Returns:

The computation directory.

Example:

This example sets the computation directory for the myJob job to "D:\CompDir".

 myJob.ComputationDir = "D:\CompDir"

o Property ContactPrint(

) As

Returns or sets whether contact constraint data are printed.

Returns:

A boolean specifying whether contact constraint data will be printed.

Example:

This example sets the printing of contact constraint data for the myJob job to False.

 myJob.ContactPrint = False

o Property Description(

) As

Returns or sets the job description.

Example:

This example sets the job description for the myJob job to "AutomatedJob".

 myJob.Description = "AutomatedJob"

o Property EchoPrint(

) As

Sets or returns whether an echo of the input data is printed.

Returns:

A boolen specifying whether the input data will be printed.

Example:

This example sets the printing of echo of the input data for the myJob job to True.

 myJob.EchoPrint = True

o Property HistoryPrint(

) As

Sets or returns whether history data are printed.

Returns:

A boolean specifying whether the the history data will be printed.

Example:

This example sets the printing of history data for the myJob job to True.

 myJob.HistoryPrint = True

o Property InputFileFormat(

) As

Sets or returns the format of the input file generated by the job.

Returns:

The input file format.

  
Legal values:
 False (an assembly of separate parts)
 True  (a single part)

Example:

This example sets the input file format for the myJob job to a single part.

 myJob.InputFileFormat = True

o Property MaxMemory(

) As

Sets or returns the amount of memory (in percent or MB) available to the solver

Returns:

The amount of memory.

Example:

This example sets the amount of memory available to the solver for myJob job to 60.

 myJob.MaxMemory = 60

o Property MemoryUnit(

) As

Sets or returns the units to be used for specifying the maximum memory to be used by the solver.

Returns:

The unit.

  
Legal values:
 PERCENT
 MEGABYTES

Example:

This example sets the unit for the myJob job to PERCENT.

 myJob.MemoryUnit = PERCENT

o Property ModelConsistencyCheck(

) As

Sets or returns whether a model consistency check should be performed.

Returns:

A boolean specifying whether a consistency check will be performed.

Example:

This example sets the Model consistency check for the myJob job to False.

 myJob.ModelConsistencyCheck = False

o Property ModelPrint(

) As

Sets or returns or sets whether model definition data is printed.

Returns:

A boolean specifying whether the model definition data will be printed.

Example:

This example sets the printing of model definition data for the myJob job to False.

 myJob.ModelPrint = False

o Property NumCpus(

) As

Sets or returns the number of CPUs to use for this analysis.

Returns:

The number of CPUs.

Example:

This example sets the number of CPUs to use myJob job to 3.

 myJob.NumCpus = 3

o Property ParallelizationMethodStandard(

) As

Sets or returns the parallelization method for the Abaqus/Standard direct solver.

Returns:

The parallelization method.

  
Legal values:
 TREE 
 SUPERNODE

Example:

This example sets the parallelization method for the myJob job to TREE.

 myJob.ParallelizationMethodStandard = TREE

o Property RestartReadInterval(

) As

Sets or returns the interval of restart read requests. This is only valid if RestartReadOption is RESTART_INTERVAL The value must be greater than 0.

Returns:

The interval of restart read requests.

Example:

This example sets the restart read request interval for myJob job to 10.

 myJob.RestartReadInterval = 10

o Property RestartReadJob(

) As

Sets or returns or the path to the original job (*.odb) file.

Returns:

The path to the original job (*.odb) file.

Example:

This example sets the original job for the myJob job to "D:\myoriginaljob.odb".

 myJob.RestartReadJob = "D:\myoriginaljob.odb"

o Property RestartReadOption(

) As

Sets or returns the restart read option. This is only valid if RestartReadOption is ABQ_STEP_OBJECT

Returns:

The option of restart read requests.

  
Legal values:
 ABQ_RESTART_END_OF_STEP - The current step is terminated from which restart  
						 is being made and restarts from end of that step.
 ABQ_RESTART_INTERVAL	- Analysis will restart from the specified interval
                    number within the specified step.

Example:

This example sets the restart read option for myJob job to end of step.

 myJob.RestartReadOption = ABQ_RESTART_END_OF_STEP

o Property RestartReadStepNumber(

) As

Sets or returns the step number of restart read requests. This is only valid if RestartReadOption is ABQ_STEP_NUMBER The value must be greater than or equal to 1 and less than total number of steps.

Returns:

The step number of restart read requests.

Example:

This example sets the step number for myJob job to 2.

 myJob.RestartReadStepNumber = 2

o Property RestartReadStepSelectionOption(

) As

Sets or returns the step selection option for restart read.

Returns:

The step selection option of restart read requests.

  
Legal values:
 ABQ_STEP_OBJECT - Selects step object
 ABQ_STEP_NUMBER	- Selects step by step number

Example:

This example sets the step selection option for myJob job to end of step.

 myJob.RestartReadStepSelectionOption = ABQ_STEP_OBJECT

o Property RestartReadStep(

) As

Sets or returns the Step.

Returns:

The Step of restart read requests.

Example:

This example sets the step for myJob job to 2.

 myJob.RestartReadStep = 2

o Property RestartRequestFrequencyValue(

) As

Sets or returns the frequencey value of restart requests. This is only valid if RestartRequestOption is ABQ_RESTART_SPECINT. The value must be greater than 0.

Returns:

The frequency value of restart requests.

Example:

This example sets the restart request frequency value for myJob job to 10.

 myJob.RestartRequestFrequencyValue = 10

o Property RestartRequestFrequency(

) As

DEPRECATED - please use RestartRequestOption instead. Sets or returns the frequency of restart requests.

Returns:

The frequency of restart requests.

  
Legal values:
 0 (None)
 1 (After each increment)
 999 (After the last increment in each step and after the last increment of the analysis)

Example:

This example sets the restart request frequency for myJob job to 999.

 myJob.RestartRequestFrequency = 999

o Property RestartRequestIntervalValue(

) As

Sets or returns the interval of restart requests. This is only valid if RestartRequestOption is ABQ_RESTART_NUMINT The value must be greater than 0.

Returns:

The interval of restart requests.

Example:

This example sets the restart request interval for myJob job to 10.

 myJob.RestartRequestIntervalValue = 10

o Property RestartRequestOption(

) As

Sets or returns the restart request option.

Returns:

The option of restart requests.

  
Legal values:
 ABQ_RESTART_NONE - No restart data.
 ABQ_RESTART_EVERYINC	- Collect on every increment.
 ABQ_RESTART_SPECINC  - Used to define the frequency to collect the data.  
                    Used in conjunction with RestartRequestFrequencyValue.
 ABQ_RESTART_NUMINT   - Used to define the interval to collect the data.
                    Used in conjunction with RestartRequestIntervalValue.
 ABQ_RESTART_LASTINC  - Collect after the last increment in each step and 
                    after the last increment of the analysis.

Example:

This example sets the restart option for myJob job to every increment.

 myJob.RestartRequestOption = RESTART_EVERYINC

o Property RestartRequestOverlay(

) As

Sets or returns the overlay option for the restart request.

Returns:

A boolean specifying whether the to use the overlay option.

Example:

This example sets the overlay option for the restart request for myJob job to True.

 myJob.RestartRequestOverlay = True

o Property RestartRequestTimeMarks(

) As

Sets or returns the time marks flag for restart requests. This is only valid if the RestartRequestOption is ABQ_RESTART_NUMINT.

Returns:

The time marks flag for restart requests.

Example:

This example sets the time marks flag for myJob job to 10.

 myJob.RestartRequestTimeMarks = True

o Property Scratch(

) As

Sets or returns or the path to the scratch directory.

Returns:

The path to the scratch directory.

Example:

This example sets the scratch directory for the myJob job to "D:\Scratch".

 myJob.Scratch = "D:\Scratch"

o Property Source(

) As

Sets or returns the source for analysis.

Returns:

The source (model or input file).

Example:

This example sets the time marks flag for myJob job to From Model.

 myJob.Source = True

o Property Type(

) As

Returns or sets the job type.

Returns:

The job type.

  
Legal values:
  ANALYSIS
  DATACHECK
  CONTINUE
  SYNTAXCHECK
  RESTART

Example:

This example sets the job type for the myJob job to ANALYSIS.

 myJob.Type = ANALYSIS

o Property UserSubroutine(

) As

Sets or returns the user subroutine file path.

Returns:

The user subroutine file path.

Example:

This example sets the user subroutine path for the myJob job to "D:\UserSub".

 myJob.UserSubroutine = "D:\UserSub"

Methods

o Sub SubmitJob(

)

Submits the job.

o Sub WriteInputFile(

)

Writes the input file for the job.

ABQJob (Object)

Property Index

Method Index

Properties

Methods