This section describes the various toolbar commands available in the
Wireframe and Surface workbench.
The toolbars are located on the right in the default set-up except for Tools,
Measure and Analysis toolbars which are located along the bottom and User
Selection Filter toolbar which appears when checked in the View > Toolbars
menu bar.
Select Toolbar
Insert Toolbar
Wireframe Toolbar
Surfaces Toolbar
Operations Toolbar
Replication Toolbar
Tools Toolbar
Developed Shapes
Apply Material Toolbar
Measure Toolbar
Analysis Toolbar
User Selection Filter Toolbar
![]() |
See Select Sub-toolbar below |
![]() |
Scan or
Define In Work Object |
![]() |
Select |
![]() |
Selection
Trap |
![]() |
Intersecting Trap See Selecting Using The Selection Traps |
![]() |
Polygon Trap See Selecting Using The Selection Traps |
![]() |
Paint Stroke Selection See Selecting Using The Selection Traps |
![]() |
Outside Trap Selection See Selecting Using The Selection Traps |
![]() |
Intersecting Outside Trap Selection See Selecting Using The Selection Traps |
![]() |
See Insert Sub-toolbars below |
![]() |
![]() |
Body |
![]() |
Body in a Set See Inserting a Body into an Ordered Geometrical Set |
![]() |
Geometrical Set |
![]() |
Ordered Geometrical Set See Managing Ordered Geometrical Sets |
![]() |
See Points Sub-toolbar below |
![]() |
See LinesAxisPolyLine Sub-toolbar below |
![]() |
Plane |
![]() |
Projection |
![]() |
Intersection |
![]() |
See Circles-Corner-Connect Sub-toolbar below |
![]() |
See Curves Sub-toolbar below |
![]() |
Point |
![]() |
Points and
Planes Repetition |
![]() |
Line |
![]() |
Axis |
![]() |
Polyline |
![]() |
Circle |
![]() |
Corner |
![]() |
Connect
Curve |
![]() |
Spline |
![]() |
Helix |
|
Extrude |
![]() |
Revolve |
![]() |
Sphere |
![]() |
Cylinder |
![]() |
Offset |
![]() |
Sweep |
![]() |
Fill |
![]() |
Multisections surface |
![]() |
Blend See Creating Blended Surfaces |
![]() |
See Join-Healing Sub-toolbar below |
![]() |
See Split-Trim Sub-toolbar below |
![]() |
See Extracts Sub-toolbar below |
![]() |
See Transformations Sub-toolbar below |
![]() |
Extrapolate See Extrapolating Curves and Extrapolating Surfaces |
![]() |
Join See Joining Geometry |
![]() |
Healing See Healing Geometry |
![]() |
Untrim See Restoring a Surface |
![]() |
Disassemble See Disassembling Elements |
![]() |
Split See Splitting Geometry |
![]() |
Trim See Trimming Geometry |
![]() |
Boundary See Boundary Curves |
![]() |
Extract See Extracting Geometry |
![]() |
Translate See Translating Geometry |
![]() |
Rotate See Rotating Geometry |
![]() |
Symmetry See Performing a Symmetry on Geometry |
![]() |
Scaling See Transforming Geometry by Scaling |
![]() |
Affinity See Transforming Geometry by Affinity |
![]() |
Axis to Axis See Transforming Elements From An Axis To Another |
![]() |
See Repetitions Sub-toolbar below |
![]() |
See Power Copy Sub-toolbar below |
|
Object Repetition See Repeating Objects |
![]() |
Points Creation Repetition See Creating Multiple Points and Planes |
![]() |
Planes Between See Creating Planes Between Other Planes |
|
PowerCopy Creation See Creating Power Copies |
![]() |
Instantiate From Document See Instantiating Power Copies |
|
Update All See Updating Parts |
![]() |
Manual Update mode See Manually Updating a Part |
|
Create 3DAxisSystem See Defining an Axis System |
![]() |
See Grid Sub-toolbar below |
![]() |
See 2D Visualization Mode Sub-toolbar below |
![]() |
Create Datum See Creating Datums |
![]() |
See KeepNoKeep Sub-toolbar below |
![]() |
See Instantiation Sub-toolbar below |
|
Work On Support See Working with a Support |
|
Snap To Point See Working with a Support |
![]() |
Work Supports Activity See Working with a Support |
![]() |
Pickable visible background See Managing the Background Visualization |
![]() |
No 3D background See Managing the Background Visualization |
![]() |
Unpickable background See Managing the Background Visualization |
![]() |
Low intensity background See Managing the Background Visualization |
![]() |
Unpickable low intensity background See Managing the Background Visualization |
![]() |
Lock See Managing the Background Visualization |
![]() |
No Keep Mode See Keeping the Initial Element |
![]() |
Keep Mode See Keeping the Initial Element |
![]() |
Catalog Browser See Instantiating Power Copies Using the Catalog |
![]() |
Instantiate From Document See Instantiating Power Copies |
![]() |
Unfold See Unfolding a Surface |
![]() |
Transfer See Transferring Elements |
![]() |
Develop See Developing Wires and Points |
![]() |
Apply Material See Applying Materials Onto Surfaces |
![]() |
Measure Between See Measuring Minimum Distances and Angles |
![]() |
Measure Item See Measuring Properties |
![]() |
Measure Inertia See Measuring Inertia |
![]() |
Connect Checker See Checking Connections between Surfaces and Curves |
![]() |
Feature Draft Analysis See Performing a Draft Analysis |
![]() |
Surfacic Curvature Analysis |
![]() |
Distance Analysis See Analyzing Distances Between Two Sets of Elements |
![]() |
Porcupine Analysis See Performing a Curvature Analysis |
![]() |
Point Filter See Selecting Using A Filter |
![]() |
Curve Filter See Selecting Using A Filter |
![]() |
Surface Filter |
![]() |
Volume Filter |
![]() |
Feature Element Filter See Selecting Using A Filter |
![]() |
Geometrical Element Filter See Selecting Using A Filter |